Keysight Infiniium 9000 Series Скачать руководство пользователя страница 29

Страница: 29 / 72

Keysight Infiniium 9000 Series Oscilloscopes

4 InfiniiScan Triggering

Capturing infrequent or hard to describe anomalies such as random glitches

requires oscilloscopes with innovative technology. InfiniiScan is a

software-based post-processing technology that makes it easy to isolate

anomalies.
This lab requires an InfiniiScan option license.

Make connections and perform initial setup:

To power the demo board, connect a USB cable between it and the

Keysight Infiniium 9000 Series oscilloscope.
You can also apply power by connecting the oscilloscope’s MSO cable to

the demo board’s 40-pin connector.

Connect the scope channel 1 probe to demo board CH1 and GND.

Make sure all other probes are disconnected from the oscilloscope.

Turn the SELECT switch to position 3 (Burst).

Press

[Default Setup]

Press

[AutoScale]

Set the time base to 1 µs/div.

Set up the trigger:

From the on-screen main menu, choose

Trigger> InfiniiScan...

(or press

[Menu]

in the front panel Trigger controls).

In the Trigger Setup dialog, select:

Содержание Infiniium 9000 Series









































































Результаты поиска

Содержание Infiniium 9000 Series

Отзывы:

Бренды по названию

Популярные бренды

Keysight Infiniium 9000 Series, Руководство по оценке

Результаты поиска

Содержание Infiniium 9000 Series

Отзывы:

Бренды по названию

Популярные бренды