Keysight Infiniium 9000 Series, Руководство по оценке

Страница: 32 / 72

32
Keysight Infiniium 9000 Series Oscilloscopes
Evaluation Guide
5 Mixed-Signal Oscilloscope (MSO)
In mixed analog and digital designs, it is often important to view multiple
analog and digital channels, which is significantly beyond the capability of a 2-
or 4-channel oscilloscope. With 2 or 4 oscilloscope channels plus 16 logic
timing channels, the unique 2+16 or 4+16 channel Mixed Signal Oscilloscope
(MSO) affords the opportunity to view more signals and to make
time-correlated measurements across all channels.
Make connections and perform initial setup:
1 Connect the MSO cable between the oscilloscope and the demo board’s
40-pin connector.
This powers the demo board and probes its digital signals.
Normally, you would use flying leads to probe digital signals in your device
under test (DUT). The demo board 40-pin connector was designed with
built-in terminations.
2 Connect the scope channel 1 probe to demo board CH1 and GND.
3 Connect the scope channel 2 probe to demo board CH2 and GND.
4 Turn the SELECT switch to position 4 (DAC).
5 Press [Default Setup] .
6 Press [AutoScale] .