Keysight Infiniium 9000 Series, Руководство по оценке

Страница: 12 / 72

1
Getting Started
12 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide
Horizontal Control
1 Turn the large Horizontal scale knob clockwise and counter-clockwise to
control the time/div setting of the horizontal axis. Observe the changes in
the displayed signal. The current time base setting is displayed in the lower
middle of the screen.
2 Turn the small Horizontal position knob to move the waveform horizontally
from the trigger point. Push this knob to center (zero) the trigger point.
3 Set the time base to 1 ms/div.
4 Press the [Zoom] key.
5 Turn the
large
Horizontal
scale knob
counter-
clockwise
to make the
window on
top larger.
6 Press the
[Zoom] key
again to
return to
the original
display.
Note: At any time, to return to the original setup, press [AutoScale].
Turn to control
horizontal position
Turn to control time/div