Keysight E3632A, Руководство пользователя

Страница: 166 / 196

5 Application Programs

Example Program for Excel 5.0 (Windows 3.1 and GPIB)
144 E3632A User’s Guide
Example Program for Excel 5.0 (Windows 3.1 and GPIB)
Excel VB Macros may be used to control your Keysight
E3632A. With Excel you can take the value of a cell in a
spread sheet, send it to the power supply, and then record
the response on the worksheet. The example on the
following pages characterizes a component across the
Keysight E3632A terminals. This example reads 11 voltages
from a worksheet, programs the Keysight E3632A to that
voltage, and then reads the current. The value of current is
recorded next to the voltage on the spread sheet. The
example is for Excel 5.0 in Windows 3.1.
To write macros and control the power supply in Excel first
open a module in Excel. From the
Insert menu choose Macro
and then Module . Name the module created this way
Diode
bas
(click the right mouse button on the tab). Create one
more module named
GPIB bas
. The module
GPIB bas
will
set up all the overhead needed to talk to the GPIB port. This
module will subroutines that allow the communication in a
simple form. The macro called
Diode is an example that
tests a diode using the other module.
To try the example for characterizing a diode, type in both
modules. Once the modules are completed, go to a
worksheet. In cell A4 type
Volts , in cell B4 type Current .
In cells A5 type 0.6 . Fill in the cells A4 to A15 in 0.02
increments so that cell A15 contains 0.8.
Now while the cursor is still in the worksheet, select Tools,
Macro from the menu. Double click on the Diode macro in
the Macro dialog box. The power supply will reset to power
on condition and then step through the voltages in the
worksheet. After each step the current is measured, and
recorded in the worksheet.
Make any changes to suit your needs in the
Diode bas
module. Change the GPIB address in the routine

OpenPort( )
contained in the
GPIB bas
module. If there is a
system error when trying to run the macro, you may have to
reboot the PC for the GPIB port to work.