Keysight Technologies M9506A-BC1 Скачать руководство пользователя страница 2

Страница: 2 / 96

Notices

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con-

sent from Keysight Technologies, Inc. as

governed by United States and interna-

tional copyright laws.

Manual Part Number

M9506-90010

Edition

Edition 1.0, September 2020
Published in Germany
Keysight Technologies Deutschland

GmbH

Herrenberger Strasse 130,

71034 Böblingen, Germany

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisi-

tion Regulation (“FAR”) 2.101. Pursuant

to FAR 12.212 and 27.405-3 and Depart-

ment of Defense FAR Supplement

(“DFARS”) 227.7202, the U.S. govern-

ment acquires commercial computer

software under the same terms by which

the software is customarily provided to

the public. Accordingly, Keysight pro-

vides the Software to U.S. government

customers under its standard commercial

license, which is embodied in its End

User License Agreement (EULA), a copy

of which can be found at:

http://www.keysight.com/find/sweula

The license set forth in the EULA rep-

resents the exclusive authority by which

the U.S. government may use, modify,

distribute, or disclose the Software. The

EULA and the license set forth therein,

does not require or permit, among other

things, that Keysight: (1) Furnish techni-

cal information related to commercial

computer software or commercial com-

puter software documentation that is not

customarily provided to the public; or (2)

Relinquish to, or otherwise provide, the

government rights in excess of these

rights customarily provided to the public

to use, modify, reproduce, release, per-

form, display, or disclose commercial

computer software or commercial com-

puter software documentation.No addi-

tional government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms,

rights, or licenses are explicitly required

from all providers of commercial com-

puter software pursuant to the FAR and

the DFARS and are set forth specifically

in writing elsewhere in the EULA. Key-

sight shall be under no obligation to

update, revise or otherwise modify the

Software. With respect to any technical

data as defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires

no greater than Limited Rights as defined

in FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDI-

TIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WAR-

RANTIES, EITHER EXPRESS OR IMPLIED

WITH REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS OR

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR ANY INFORMA-

TION CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A SEP-

ARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Trademarks

AXIe is a registered trademark of the AXIe

Consortium.
PXI is a registered trademark of the PXI

Systems Alliance.
PICMG®, Compact PCI®, and

AdvancedTCA® are registered trade-

marks of the PCI Industrial Computer

Manufacturers Group.
PCI-SIG®, PCI Express®, and PCIe® are

registered trademarks of PCI-SIG.
Thunderbolt and the Thunderbolt logo

are trademarks of Intel Corporation or its

subsidiaries in the U.S. and/or other

countries.

echnology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.
Keysight Technologies does not warrant

third-party system-level (combination of

chassis, controllers, modules, etc.) per-

formance, safety, or regulatory compli-

ance unless specifically stated.

Sales and Technical Support

To contact Keysight for sales and techni-

cal support, refer to the support links on

the following Keysight websites:

www.keysight.com/find/M9506A

(product-specific information and sup-

port, software and documentation

updates)

www.keysight.com/find/assist

(worldwide contact information for repair

and service)

Declaration of Conformity

Declarations of Conformity for this prod-

uct and for other Keysight products may

be downloaded from the Web. Go to

http://keysight.com/go/conformity

and

click on “Declarations of Conformity.” You

can then search by product number to

find the latest Declaration of Conformity.

Содержание M9506A-BC1

































































































Результаты поиска

Содержание M9506A-BC1

Отзывы:

Keysight Technologies M9506A-BC1, Инструкция по эксплуатации, Страница: 2 / 96

Результаты поиска

Содержание M9506A-BC1

Отзывы: