29
EN
Key Automation S.r.l. produces systems for the automation of gates,
garage doors, automatic doors, rolling doors, parking lots and road
barriers. However, Key Automation is not the manufacturer of your
automation, which is rather the result of a process of analysis, evalu-
ation, selection of materials, and installation performed by your own
installer. Each automation is unique and only your installer has the
experience and professionalism required to create an installation to
suit your needs, safe and reliable over time, and carried out accord-
ing to the good industry practice, i.e. compliant with the current regu-
lations. Even if your automation meets the security level required by
law, this does not exclude the existence of “residual risks”, i.e. the
possibility that it may cause dangerous situations, usually as a result
of improper or irresponsible use; for this reason we would like to give
you some suggestions:
Before using the automation for the first time, ask the installer to
explain the origin of residual risks;
Keep this manual for future use and deliver it to any new owner of
the automation;
Inappropriate or improper use of the automation can make it danger-
ous: do not command the movement of the automation if people,
animals or things are in its range;
If properly designed, an automation ensures a high degree of secu-
rity, preventing movement in the presence of people or things with its
detection systems, and ensuring always predictable and safe activa-
tion. It is prudent to prevent children from playing near the automa-
tion and keep remote controls out of their reach to prevent accidental
activation;
As soon as you notice any malfunctions, disconnect the installation
from the power supply and operate the manual release. Do not at-
tempt any repairs by yourself, but require the assistance of your in-
staller: meanwhile, the installation can operate like a non-automated
opening device after releasing the motor with the release key sup-
plied with the system;
In case of failures or power failures: while awaiting the arrival of
your installer or the restore of the electricity, if the installation is not
equipped with backup batteries, the automation can be operated as
any normal non-automated opening device. To do this, you must run
the manual release;
Release and manual movement: before performing this operation
pay attention that the device can be released only when the door is
stationary.
Maintenance: Like any machine, your automation needs periodic
maintenance to ensure its long life and total safety. Agree with your
installer on a maintenance plan on a periodic basis; Key Automation
recommends a frequency of 6 months for normal domestic use, but
this period may vary depending on the intensity of use. All inspec-
tion, maintenance or repairs should be performed only by qualified
personnel;
Do not change the installation and control or programming param-
eters of the automation: the responsibility lies with your installer;
The testing, routine maintenance and any repairs must be docu-
mented by the person who performs them, and related documents
must be kept by the owner;
The only interventions that are possible for the user and should be
carried out periodically are the cleaning of the covers of the photo-
cells, as well as the removal of any leaves or rocks that could block
the automation. To prevent anyone from activating the door, before
proceeding, remember to release the automation and clean only
with a cloth slightly dampened with water;
At the end of the automation life, make sure that the dismantling is
carried out by qualified personnel and the materials are recycled or
disposed of according to local regulations in force;
If your remote control seems to work worse or not work at all after a
while, this may simply depend on the exhaustion of the battery (de-
pending on use, it may take several months to over a year). In that
case, you will see that the confirmation of transmission light does not
turn on, or comes on only briefly;
The batteries contain polluting substances: do not throw them in the
garbage but use the methods prescribed by local regulations.
Thank you for choosing Key Automation S.r.l.; for more information
feel free to visit our website www.keyautomation.it.
7 - INSTRUCTIONS AND WARNINGS FOR THE END USER
6.2 - Reset and special settings with password
Turning on or resetting the device holding down the OK button for
3 seconds, you will hear a short beep and the display will show:
“0000”
Ope and - you can edit the first two digits and the second
two digits of the number separately, then setting a password which
must be confirmed by holding down the OK button for two seconds.
Depending on the password set, the following operations will be
performed:
password 2468
: Start cyclic test mode.
password 8765
: Reset all default parameters. After the reset,
learning is forced:
Please note: Until the first learning operation has been com-
pleted, all parameters will be reset to default at every start-up
or reset.
password 1234
: Enabling special views
