Functions and operation of the TX5 training computer
GB
SAFETY INFORMATION
• In order to avoid injuries caused by incorrect weight bearing or overloading, the training device must only be operated according
to the instructions.
• Before the first use and additionally after 6 days of operation the connections should be checked to make sure they are secure.
• Check the functionality and the proper state of the training device on a regular basis.
• The safety related checks are one of the operator’s obligations and must be carried out regularly and properly.
• The level of safety of the device can only be retained by regularly checking for damages and wear.
• Defective or damaged components are to be exchanged immediately. Procedures on electrical components must only be carried
out by qualified personnel. Please only use original KETTLER spare parts.
• The device must not be used until it has been repaired.
• Before starting the training, please ask your GP to check that you are fit to be trained on this device. The medical findings should
be the basis for the expansion of your training programme. Incorrect or excessive training can be harmful to health.
• The treadmill should only be used for your intended purpose, i.e. for running and walking training or adult persons.
Please adhere to the maximum user weight.
• Always train with the attached safety key
• Familiarise yourself with the movement sequences at a low speed during the first few training units.
• In the case of uncertainty hold onto the handrail, step onto the side platforms and stop the treadmill.
Important:
adhere to the safety information in the assembly and construction instructions.
Safety switch
Always attach the safety key to the safety switch before training and clamp the cord of the safety key to your clothing. Adjust the
cord length: If you stumble then you should activate the safety switch.
The safety switch was developed to turn off the motor for the treadmill and the height adjustment immediately if you fall off or find
yourself in an emergency situation. At high speeds it can be unpleasant and even a little dangerous if the treadmill immediately
stops. Therefore only use the safety switch for an emergency stop. To stop the treadmill safely, comfortably and completely under
normal conditions during training, please use the STOP button.
• Check the safety switch before the start of training.
Stand on the side platform and start the treadmill at minimum speed. Withdraw the safety key from the safety switch. The treadmill
should stop immediately. Then attach the safety key to the safety switch again and the cord to your clothing. Move to the back of
the stopped treadmill. The safety key must come loose from the safety switch. The cord should still stay attached to your clothing.
Afterwards fasten the safety key onto the safety switch again.
• Treadmill security
Uncontrolled use of the treadmill by third parties can be avoided by removing and storing the safety key. Please store the safety key
carefully and keep out of reach of children!
