Kessel Ecolift, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 28 / 144

28 / 144
Introduction
04/2017
1.2 General instructions on using these operating and maintenance instructions
These operating and maintenance instructions are only complete in combination with the operating and
maintenance instructions of the Ecolift control unit (part no. 016-004).
Symbols and legends used
<1> Reference in the text to a legend number in an illustration
[2] Reference to an illustration
• Working step
3. Working step in numbered sequence
– List
Italics Italic case design: Reference to a section / item in the control menu
CAUTION: Warns of a risk to persons and material. Ignoring the instructions marked with this
symbol can lead to serious injuries and material damage.
Note: Technical notes which must be given particular attention.
1.3 How it works
1.3.1 How the Ecolift for underground installation works
65 Pressure pipe
66 Backwater level
65
66
Fig. [1]
1.3.2 How the Ecolift for installation above ground works
65 Pressure pipe
66 Backwater level
1.4 Type plate
Information on the typeplate
1 Name of the system
2 Article number
3 Connection voltage and connection frequency
4 Hydraulic data
5 General data
6 Serial number
7 Date of manufacture
8 Revision index
9 Name of standard
10 Order number
65
66
Fig. [2]
RevStd.: X.X TT.MM.JJ JJ
S3 xx% ED IP xx (3mWS /48h)
xxxxx
Ecolift
XY
U = xxxV xxHz I = x,xA P1 = x,xkW
Ser.Nr. xxxxxxx
Q = xxm³/h H = xxm
www.kessel.com
Auftr.Nr.: xxxxxxx
DIN-EN 12050-1
2
1
2
3
9 8
6
4
5
10
7
Fig. [3]