KERN KLB-TM, Руководство по эксплуатации

Страница: 34 / 53

8.10 Tolerance weighing
For tolerance weighing compare the current weight value to a lower and upper limit.
These limits must have been stored beforehand.
When placing for instance ready-made packaging, it will be shown whether the
weight is within the allowable tolerance.
Operation: Display:
Ö
Turn on display unit by pressing the
ON/OFF
key
0.00 g
Ö
Press
F
-key
1 Funi
Ö
Repeatedly press the
a
key until 3
HiLo
appears
3 HiLo
Ö
Press
TARE
key
Min 0000.00g
Ö
To enter the lower tolerance limit (e. g. 90.00 g): Use the
TARE
key, to select the digit to be changed, the
a
key
is used to increase the numerical value (active digit
flashing)
Min 0090.00g
Ö
Press the
PRINT
key; the lower tolerance limit will be
imported.
Ö
To enter the upper tolerance limit (e. g. 110.00 g): Use the
TARE
key, to select the digit to be changed, the
a
key
is used to increase the numerical value (active digit
flashing)
Max 0100.00g
Ö
Press the
PRINT
key; the upper tolerance limit will be
imported and jumps to tolerance weighing mode.
Ö
Example for application: Weight: 50 g on weighing plate
Ö
Weight: 100g on weighing plate
Ö
Weight: 150g on weighing plate
Min 50.00g
Ok 100.00g
Max 150.00g
Ö
Go back to weighing mode by pressing the
F
key twice.
0.00 g
The value entered for the upper tolerance limit must be greater than the lower
tolerance value. Error message
–Lo-
appears on the display and the display of the
unit returns to weighing mode.
KLB-TM-BA-e-0811 34