![background image](http://html1.mh-extra.com/html/kern/klb-tm/klb-tm_operating-manual_1957000026.webp)
8.6.5 Battery status display
This function is used to display the charge status of the battery.
Operation:
Display:
0.00 g
Ö
Press the
F
key and
TARE
key simultaneously
batt
Ö
1 second later
94%
Ö
2 seconds later
0.00 g
The display unit returns to weighing mode after the charge status of the battery was
shown. The display symbol
(bat low) will be activated when the charge status of
the battery drops below 18%.
8.6.6 Charge display
This function can be used to suppress the charge function.
This suppresses the short illumination of the battery symbol if the weighing unit is
operated without battery or accumulator. (supply by power pack)
The kind of supply is shown when the balance is started. bAtt / SLA / nlnnH
CHr6 YES
nlnnH
Function activated / 6 x NiMH battery in use
CHr6 YES
SLA
Function activated / SLA battery in use
CHr6 no
bAtt
Battery operation
ATTENTION! Explosion hazard
: For battery operation the setting must be
no
Operation:
Display:
Ö
Selecting the menu item
P5 othr
Ö
Press
TARE
key
5.1.bl
Ö
Repeatedly press the
a
key
until the following
display appears
5.5. CHr6
Ö
To change your selection, press the
TARE
key.
no
Ö
To change your selection, press the
a
key.
YES
Ö
Setting will be imported by pressing the
key.
5.5.CHr6
KLB-TM-BA-e-0811
26