Chapter 23
Kerio VPN
286
later).
2.
Regarding two VPN tunnels, it is also examined when establishing a connection
whether the VPN subnet does not collide with IP ranges at the other end of the tunnel
(remote endpoint).
If a collision with an IP range is reported upon startup of the VPN server (upon click-
ing
Apply
in the
Interfaces
tab), the VPN subnet must be set by hand. Select a network
which is not used by any of the local networks participating in the connection. VPN
subnets at each end of the tunnel must not be identical (two free subnets must be
selected).
3.
VPN clients can also be assigned IP addresses according to login usernames. For
details, see chapter
SSL certificate
Information about the current VPN server certificate. This certificate is used for ver-
ification of the server’s identity during creation of a VPN tunnel (for details, refer to
chapter
). The VPN server in
WinRoute
uses the standard SSL certificate.
When defining a VPN tunnel, it is necessary to send the local endpoint’s certificate fin-
gerprint to the remote endpoint and vice versa (mutual verification of identity — see
chapter
).
Hint
Certificate fingerprint can be saved to the clipboard and pasted to a text file, email mes-
sage, etc.
Click
Change SSL Certificate
to set parameters for the certificate of the VPN server. For
the VPN server, you can either create a custom (self-subscribed) certificate or import a cer-
tificate created by a certification authority. The certificate created is saved in the
sslcert
subdirectory of the
WinRoute
installation directory as
vpn.crt
and the particular private
key is saved at the same location as
vpn.key
.
Methods used for creation and import of SSL certificates are described thoroughly in
chapter
.
Note:
If you already have a certificate created by a certification authority especially for
your server (e.g. for secured Web interface), it is also possible to use it for the VPN server
— it is not necessary to apply for a new certificate.
DNS configuration for VPN clients
To allow VPN clients to access to local hosts using the hostnames, they need at least one local
DNS server.
The
WinRoute’s
VPN server allows for the following options of DNS server configuration:
•
Use WinRoute as DNS server
— IP address of a corresponding interface of
WinRoute
host will be used as a DNS server for VPN clients (VPN clients will use the
DNS
module;
see chapter
). This is the default option in case that the
DNS
module is enabled in
WinRoute
.
Содержание KERIO WINROUTE FIREWALL 6
