KEP MMI-1500, Руководство по установке и эксплуатации

Страница: 60 / 306

52
Style:
Tracking, Monopoly Clipping and Coherence
These parameters specify the relationship between a child pop-up window and it’s base calling window.
Monopoly:
If a child window is marked as
Monopoly,
the calling window is frozen when it is popped up.
Clipping:
A child window marked as
Clipping
limits its boundary to the calling window. This means the child window’s
display area outside of the base calling window’s frame is cut off.
Tracking:
A child
Tracking
window moves when the calling window is moved.
Note:
Both the Clipping and Tracking must be selected or deselected.
Coherence:
Coherence means that there can be no windows between the calling window and this window. One
cannot be brought to the foreground without the other; both are brought forward.
Security:
This prevents unauthorized access to windows when the System Parameter, Security
feature is activated. Lowest is security level 0, Middle is security level 1 and Highest is security
level 2. See the
Security
Section for further details.
Underlay Window:
Up to three windows can be specified as underlay windows. An underlay window adds its objects into
the base window being created. The Underlay window’s attributes (Style, Security, Underlay, Frame, etc.) are ignored for this
purpose.
LIMITATION NOTE:
Trend displays cannot be on both an Underlay window and a Normal window. Projects with
underlay windows cannot be opened by EasyBuilder versions prior to 1.6.6 even if System Parameter Compile level is
set to 0.
Frame:
A Frame is suggested for child windows. The width in pixels of the frame can be selected from the drop down (0, 4,
6, 8, 10, 12, 14, and 16). If the Frame is not set to 0, the 16 basic colors are available for the frame.
Note:
Objects placed on top of the frame during project development are covered by the frame when the project is
running.
Background:
Select the background Color, Pattern and Pattern Color for the window. The Filled option enables and
disables the Pattern in Design and Run modes. See the Drawing section for details about available patterns.
Note:
If the
Filled
option is not checked the window’s background color is not shown during project design but is
shown during simulation and run modes.