KEP Multi-Protocol Communication Card Option Start-up Guide
Page 33
Appendix A.8. Reading Data Arrays
•
Connect to the COM CARD with a browser and click on the Diagnostics & Debugging button.
•
Select the User Messages branch.
•
Select the info tab.
•
See which profile has been loaded.
o
Example: prof1b.csv
•
In the address bar of the browser, type the IP address/filename.
o
Example: 192.168.1.24/prof1b.csv
•
Press the enter key and save the file.
•
Open the file and go to the server side map descriptors section.
•
The map_descriptor_name, data_array_name, and data array_offset will be shown for each point.
•
Go back to the browser and select the view branch.
•
Select the data arrays branch.
•
Select the data array that corresponds with the point that you want to monitor.
•
View the offset that corresponds with the point that you want to monitor.