Figure 19: LonWorks Service Pin Location
KEP Multi-Protocol Communication Card Option Start-up Guide
Page 22
8.1 Commissioning COM CARD Option 4 on a LonWorks Network
The User will be prompted by the LonWorks Administrator to hit the Service Pin on the COM CARD
Option 4 at the correct step of the Commissioning process which is different for each LonWorks
Network Management Tool.
•
If an XIF file is required, see steps in
Section
8.1.1
to generate XIF.
8.1.1 Instructions to Download XIF File from COM CARD Option 4 Using Browser
•
Connect a CAT5 Ethernet cable (Straight through or Cross-Over) between the PC and COM
CARD.
•
The Default IP Address of COM CARD is
192.168.1.24
, Subnet Mask is
255.255.255.0
. If the PC
and COM CARD are on different IP Networks, assign a static IP Address to the PC on the
192.168.1.xxx network.
•
For Windows XP:
Go to
>
>
Right-click on Local Area Connection > Properties
Highlight
>
•
For Windows 7 or later:
Go to
>
>
>
>
Right-click on Local Area Connection > Properties
Highlight
>
Commissioning may only be performed by the LonWorks administrator.
8 LONWORKS (Option 4): COMMISSIONING COM CARD ON A LONWORKS NETWORK
