KEP Multi-Protocol Communication Card Option Start-up Guide
Page 16
Figure 13: Changing IP Address via Web GUI
•
From the Web GUI landing page, click on “Setup” to expand the navigation tree and then select
“Network Settings”
to access the IP Settings menu. (
Figure 13
)
•
Modify the IP Address (N1 IP Address field) of the COM CARD Ethernet port.
•
If necessary, change the Netmask (N1 Netmask field).
•
Type in a new Subnet Mask.
•
If necessary, change the IP Gateway (Default Gateway field).
•
Type in a new IP Gateway.
NOTE:
If the COM CARD is connected to a router, the IP Gateway of the COM CARD should be set to
the IP Address of that router.
•
Reset COM CARD.
•
Unplug Ethernet cable from PC and connect it to the network hub or router.
•
Record the IP Address assigned
to the COM CARD for future reference.