KEP Multi-Protocol Communication Card Option Start-up Guide
Page 13
5.2 Connecting to COM CARD Web Configurator
•
After setting a local PC on the same subnet as the COM CARD (
Section
5.1
), open a web
browser on the PC and enter the IP Address of the COM CARD; the default address is
192.168.1.24.
NOTE:
If the IP Address of the COM CARD has been changed by previous configuration, the assigned
IP Address can be discovered using the FS Toolbox utility. See
Appendix A.1
for instructions.
5.3 Selecting Profiles for Device Connected to COM CARD
Figure 9: Web Configurator Showing no Active Profiles
•
In the Web Configurator, the Active Profiles section is shown on the lower left side of the screen.
•
The Active Profiles section lists the currently active device profiles, including previous Web
Configurator additions. This list will be empty for new installations, or after clearing all con-
figurations. (
Figure 9
)
•
To add an active profile to support a device, click the ADD button under Active Profiles. This will
present a drop-down box underneath the Current Profile column that lists all the available profiles.
(
Figure 10
)
•
For every device that is added, assign a unique Modbus Node-ID. This specification must match the
device’s network settings.
