35
Daily Test Tab
As shown in the figure below, this tab is used to set the codes used for daily test reports. There is a
programmable system all normal code and a separate system off-normal code.
The factory default codes are:
RP
“Automatic Test”
RY
“Test Off Normal”
Manual Test Tab
This tab is used to set the event code transmitted with manual test reports. The factory default code is RX
‘manual test’.
Set Telephone Numbers
These boxes are used to set the primary and secondary telephone numbers that S/FDACT will dial when
reporting. Both must be set before uploading the configuration to the S/FDACT.
Up to 20 digits or characters may be entered for each telephone number. The "," (comma) character is the
SIA standard character for a two second pause during dialing. Each comma counts as one telephone
number digit. Each additional comma generates another two second pause, i.e. three sequential commas
will generate a six second pause (and will count as three telephone number digits.)
