Keithley 2308, Руководство пользователя

Страница: 163 / 226

2308-900-01 Rev. A / July 2008 Return to Section Topics 11-5
Model 2308 Portable Device Battery/Charger Simulator User’s Manual Section 11: SCPI Tables
OUTPut command summary
Table 11-3
OUTPut command summary (refer to Table 2-3 and Table 5-2 )
Command Description
Default
parameter SCPI
:OUTPut[1]
OUTPut subsystem for battery channel (#1) ✓
[:STATe] <b> Turn output ON or OFF. OFF
✓
[:STATe]? Query state of output.
✓
:BANDwidth
Specifies HIGH or LOW bandwidth when the output
state is ON. When output is OFF, the bandwidth is
LOW and the user setting is not applied. Once the
output is ON, the user setting takes effect.
LOW
:BANDwidth? Query bandwidth setting for when output is ON.
:IMPedance <NRf> Specifies the output impedance to apply 0 (OFF) to
1
Ω
(max) in 10 m
Ω
steps.
0
:IMPedance?
Query impedance setting.
:RELay1 <name> Close (ONE) or open (ZERO) relay control circuit
for relay 1.
ZERO
:RELay1?
Query the value at relay 1 port pin digital I/O.
:RELay2 <name>
Close (ONE) or open (ZERO) relay control circuit
for relay 2
ZERO
:RELay2? Query the value at relay 2 port pin digital I/O.
:RELay3 <name>
Close (ONE) or open (ZERO) relay control circuit
for relay 3.
ZERO
:RELay3? Query the value at relay 3 port pin digital I/O.
:RELay4 <name> Close (ONE) or open (ZERO) control circuit for
relay 4.
ZERO
:RELay4?
Query the value at relay 4 port pin digital I/O.
:OUTPut2 OUTPut subsystem for channel #2 (charger channel)
✓
[:STATe] <b> Turn output ON or OFF. OFF
✓
[:STATe]?
Query state of output.
✓
:BANDwidth
Specifies HIGH or LOW bandwidth when the output
state is ON. When output is OFF, the bandwidth is
LOW and the user setting is not applied. Once the
output is ON, the user setting takes effect.
LOW
:BANDwidth? Query bandwidth setting for when output is ON.
:BOTHOUTON
*
:BOTHOUTOFF
*
Turns both power supply channels ON.
Turns both power supply channels OFF.
*
No query or short form exists.