Series 2280 Precision DC Power Supply Reference Manual
Section 2: General operation
077085503 / March 2019
2-61
Figure 44: SCPI command web page
2. In the
Command
box, enter the SCPI command. You can enter a single command or batch
commands, as shown in the figure.
3. Select
Send
to send the command to the instrument.
4. Select
Read
to get the returned value for a query command.
5. Select
Send & Read
to send a command and read the response from the instrument.
6. Select
View Errors
to get the oldest error in the event log and remove it.
7. Select
Clear
to clear all the history information shown on the web page.
If you enter batch commands in the command box and select
Auto
, you will run the batch
commands automatically, one-by-one. Select
Stop
to stop the automatic run of the batch
commands.
If you select
Step
, you will run the batch commands manually, one at a time. You can select any
command from the left panel to start running the batch. You can edit the commands that are
displayed in the left panel.