Series 2280 Precision DC Power Supply Reference Manual
Section 2: General operation
077085503 / March 2019
2-5
Figure 3: Power supply home screen
#
Screen element
Description
1
System status and event indicators
Located at the top of the home screen, these indicators provide
information about the present state of the instrument. Some of
the indicators open up a dialog box with more information or a
settings menu when selected. For details, see
(on page 2-5).
2
OUTPUT view area
The green part of the home screen; displays the value of the
present outputs and status indicators.
3
Setting area
Located in the lower left corner of the OUTPUT view area.
Shows the presently set measure range, voltage, and current
limit.
4
Soft-key area
The soft-key area is on the bottom of the home screen. There
are three soft-key areas that show the present setting values.
You can change these values by pressing the buttons below the
screen. To see the additional soft-key areas, select
Next
at the
bottom right of the screen. For more information, see
(on page 2-10).
Status and error indicators
The indicators across the top of the home screen contain information about the following instrument
settings and states. Highlight an indicator by turning the navigation control and then pressing
ENTER
to get more information about the present state of the instrument.