![background image](http://html1.mh-extra.com/html/keiser/m3i-lite/m3i-lite_installation-and-operation-manual_3933847014.webp)
555518_A
p14.
M3i INDOOR GROUP CYCLE
OPERATION
The resistance shifter can be used as an emergency brake to stop the motion of the flywheel. To use the resistance
shifter as an emergency brake, move the lever all the way forward to stop all motion within one revolution, refer to
Figure 19. With any braking procedure, wait until the pedals and flywheel come to a complete stop before dismounting.
• Are all parts correctly installed?
• Are the four Acorn nuts that secure the main cycle frame to the base frame torqued at 45 Nm (35 ft-lbs)?
• Are pedals installed with thread locking compound and torqued to 45 Nm (35 ft-lbs)?
• Are all screws and nuts properly torqued and tightened?
• Do the handlebar and seat adjustments operate properly?
• Was LPS #3 applied to the left bottom bracket bearing?
• Was LPS #3 applied to the clip-in portion of the pedals?
• Has the cycle been polished with paste or spray wax and a clean cloth?
• Is the computer installed and operational?
NOTE: Perform the operations below before riding the cycle. Failing to test a cycle prior to normal use will void your warranty and
could result in serious injury.
WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury
or death. If you feel faint stop exercising immediately.
OPERATION
CHECKING FOR PROPER OPERATION
EMERGENCY STOP
Figure 19. Emergency Brake Position