![background image](http://html1.mh-extra.com/html/keiser/m3i-lite/m3i-lite_installation-and-operation-manual_3933847010.webp)
555518_A
p10.
M3i INDOOR GROUP CYCLE
OPERATION
1. Use a #2 Phillips screwdriver and remove the
computer mounting screw from the handlebar tube,
refer to Figure 11.
2. Coil the computer cable into the computer mount
cavity, refer to Figure 12.
3. Slide the computer in the two locking ears.
4. Insert and secure the computer with the screw
previously removed using a #2 Phillips screwdriver.
1. Remove screws from both sides of the sweat guard,
refer to Figure 13.
2. Slide on the guard cover over the sweat guard and
snap it in place, refer to Figure 14.
3. Secure the cover with the screws previously removed.
Do not over tighten screws.
INSTALLING THE COMPUTER
ASSEMBLING THE HANDLEBARS
Figure 11. Remove Mounting Screw From Handlebar Tube
Figure 13. Remove Screws From Sweat Guard
Figure 14. Align the Guard Cover Over the Mounting Holes
Figure 12. Attaching the Computer to the Handlebar Tube