Keba Kemro KeTop T10, Руководство по проектированию устройства

Страница: 86 / 91

Code Description
0 No error
1 Error in first two sets (internal icons and 64 x 64)
2 Error in third set (32 x 32)
3 Error in first two sets and in third set
4 Error in fourth set (64 x 64 customized)
5 Error in first two sets and in fourth set
6 Error in third and fourth set
7 Error in first two sets, in third set and in fourth set
8 Error in fifth set (32 x 32 customized)
9 Error in first two sets and in fifth set
A Error in third and fifth set
B Error in first two sets, in third set and in fifth set
C Error in fourth set and in fifth set
D Error in first two sets, in fourth set and in fifth set
E Error in third, fourth and fifth set
F Error in all sets
EEPROM
No. Description
0 No error
1 EEPROM cannot be read (bus or storage error)
20.2 Codes for errors or warnings
The error code respective the warning code is a more detailed description of
the status code and explains occured errors and warnings. The code consists
of a double figure.
Error
No
.
Enum ID Description
Appendant diag-
nosis code
00
eKvcErrorNotIni-
tialized
KVC cannot be initialized, start up failed KVC_NOT_INIT
01
eKvcErrorWrong-
TelNr
Wrong telegram number KVC_PROTOCOL_ERR
02
eKvcErrorMsgTo-
Long
Received KVC message too long
KVC_PROTOCOL_ERR
03
eDevmonErrorMax-
Listeners
Maximum number of devices reached, re-
ceiving device cannot be added
APPL_DEVMON
04
eDevmonErrorNo-
tInitialized
Device monitoring cannot be initialized APPL_NOT_INIT
05
eDispManErrorNo-
tInitialized
Display manager cannot be initialized APPL_NOT_INIT
Appendix: Status and error codes KeTop T10
© KEBA 2014
Project engineering manual V1.02 86