GB - 7
Product Description
2.
Product Description
2.1
Intended use
The frequency inverter KEB COMBIVERT F5 serves exclusively for the control and regu-
lation of three-phase motors. The operation of other electric consumers is prohibited and
can lead to the destruction of the unit.
Frequency inverter are components which are intended for the installation in electric sys-
tems or machines.
2.2
Unit identification
14 . F5 . G 1 E - 3 A 0
0
Cooling
A: Heat sink
D: Convection
B: Flat rear
Encoder interface
0: none
Switching frequency; short time current limit;
overcurrent limit
0: 2 kHz; 125 %; 150 % 6: 8 kHz; 150 %; 180 %
4: 2 kHz; 150 %; 180 % A: 8 kHz; 180 %; 216 %
5: 4 kHz; 150 %; 180 % B: 16 kHz; 180 %; 216 %
Input identification
1: 3-phase 230 V AC or DC supply
3: 3-phase 400 V AC or DC supply
Housing type E
Accessories
1: Braking transistor
B: such as 1 but with safety relais
3: Braking transistor and integrated filter
D: such as 3 but with safety relais
Control type
A: APPLICATION
1)
G: GENERAL
B: BASIC
2)
H: ASCL
C: COMPACT
M: MULTI
E: SCL
S: SERVO
Series F5
Inverter size
1) At control card APPLICATION
without
encoder interface see type „GENERAL“,
with
encoder interface see
type „MULTI“.
2) An output frequency of up to 1600 Hz is possible by changing the operating mode at control type "BASIC" (xx-
F5Bxx-xxxx). This devices are subject to export authorisation according to entry 3A225 Annex I of the Dual-Use
Regulation.
