GB - 19
Operation of the Unit
4.1.4 Remote control
For remote control of the KEB COMBIVERT F5 a special HSP5 operator is available.
Operator
Cable
The last three digits of the part number indicate the
length of the cable in dm.
00F5060-9000
00F50C0-2xxx
00F5060-9001
00F50C0-3xxx
4.1.5 Other operators
In addition to the described operators the KEB COMBIVERT can be equipped with further
operators for special applications (Profibus, Interbus, Sercos, CAN, DeviceNet). You find
further information on that on our home page.
4.2
Keyboard Operation
4.2.1 Parameter numbers and values
When switching on KEB COMBIVERT F5 the value of parameter CP.1 appears.
The function key changes between the parameter
value and parameter number.
FUNC.
SPEED
With UP (▲) and DOWN (▼) the value of the
parameter number is increased/decreased with
changeable parameters.
START
STOP
START
STOP
Principally during a change, parameter values are immediately accepted and stored non-
volatile. However, with some parameters it is not useful that the adjusted value is accepted
immediately. In these cases the adjusted value is accepted and stored non-volatile by
pressing ENTER. When this type of parameter is changed a point appears behind the
last digit.
By pressing „ENTER“ the adjusted value is
accepted and non-volatile stored.
ENTER
F/R
2
3
5
2
3
7
RS232-cable 3m
PC / Operator
Part number 00.58.025-001D
9-pole SUB-D connector
F5-Operator
Housing (PE)
9 pole SUB-D female
PC
