|
keatingofchicago.com
8
B. How to program the “Keating” Electronic Timer
STEP 1
Make certain power to the timer has been OFF for
at least 30 seconds. Then PRESS and hold down
the UP arrow button while turning the rocker power
switch to the ON position.
NOTE:
If power switch does not turn off timers, the
unit must be unplugged (two people may be needed).
The timer will turn ON and the display will now be
indicating
:
The BEEPER will BEEP 4 times.
If STEP 1 was OK, proceed to STEP 2. If not, retry
Step 1 making sure the power was OFF for at least 30
seconds or more.
STEP 2
PRESS all 3 buttons in sequence: left-center-right.
The BEEPER will BEEP when each button is pressed.
If BEEPER does not BEEP, the timer is defective. STOP
TESTING. Reset procedure is completed when 1:00
appears on the digital display.
OPTIONAL TIMER
Operating Instructions (Part # 056921)
DIGITAL TIMERS
The electronic timers, standard on TS & IFM models,
provide a clearly visible and accurate display and are
very easy to use.
PROGRAMMING
To program the timers, the unit must be in the idle
mode. Press and hold the set button for approximate-
ly two seconds. The display will show “SEt”. Press
the T1, T2 or T3 for the cook time to be programmed.
The display will show the current setting for that cook
time. Use the up or down button to increment or
decrement the setting. When the setting is correct,
press and hold the set button again for approximately
two seconds. The display will show “StO” for ap-
proximately two seconds and the timer will return to
normal operation. Repeat the process as necessary
for the other timers.
OPERATING LOGIC
When the timer is powered up, the display will show
the time setting for the cook time that was operated
last and the relay output contacts will be open. To
start a cycle, press the desired cook time button (T1,
T2 or T3). The display will begin to countdown from
the preset time setting and the relay output contacts
will close. During the countdown the colon will fl ash at
a one-second rate. When the countdown has reached
“00:00” the relay output contacts will open, the
display will fl ash, and the audible alarm will sound. To
cancel the audible alarm, press any button.
PAUSE FEATURE
To pause a cycle in progress, press any button. The
relay output contacts will open, the display will fl ash,
and the countdown will pause. To resume the count-
down, press any button. The display will resume the
normal countdown and the relay output contacts will
close.
CANCELING A CYCLE
To cancel a cycle in progress press and hold any but-
ton for approximately two seconds. The relay output
contacts will open and the display will show the time
setting for the cook time last used.
OIL BREAKDOWN
As part of a “Preventive Maintenance Program”, the
oil in your fryer needs to be fi ltered regularly. The
initial investment in the frying system is less than the
total overall costs of oil during the life of the fryer, and
with regular fi ltering, you can realize substantial sav-
ings in oil costs, as well as, maintenance charges. We
have listed some of the conditions which are catalysts
in the breakdown of oil:
OR
