HOW TO USE TIMER FUNCTION
定時功能的使用方法
VENT. mode
換氣模式
Default settings
CONT
5 MIN.
15 MIN.
12 HOUR
出廠設置為
DRY HOT mode
熱 乾燥 模式
Default settings
5 MIN.
15 MIN.
6 HOUR
出廠 設置 為
HEAT mode
Default settings
5 MIN.
15 MIN.
3 HOUR
出廠設置為
暖氣模式
Default settings
15 MIN.
出廠設置為
Default settings
15 MIN.
出廠設置為
Default settings
15 MIN.
出廠設置為
CARE MODE - WARM BATH mode
貼心模式 - 溫暖沐浴模式
5 MIN.
1 HOUR
CARE MODE - DRY
CLOTH mode
貼心模式 - 高效乾衣模式
5 MIN.
6 HOUR
CARE MODE - REFRESH mode
貼心模式 - 極速排氣模式
5 MIN.
1 HOUR
1
2
During running, you can press the button to change the running time.
If you press and hold the button, the running time keeps changing.
After the running time is set once, the system will automatically
memorize the last running time of each mode.
To cancel the automatic memory content, press and hold the
button for 3 seconds.
For adjusting running time
調 整運轉 時 間時使 用
如連續按
,
運轉時間會連續快速變換
。
取消自 動 記憶 內 容
,
請長 按 按鈕
3
秒
。
設置一 次 運轉 時 間 後
,
會 自動記憶每個模式上一次 的 運轉時 間
。
Each time you press the
button, the time increases accordingly.
每按一次 按鈕
,
時間會隨之遞增
;
Each time you press the
button, the time decreases accordingly.
每按一次 按鈕
,
時間會隨之遞減
;
在 上 記運
轉
模
式
中每 按 一
次
按鈕
,
時 間會以
5
分進行增減
,
1
小時
後
時間會以
30
分
鐘進 行 增減
。
In
the above running mode, each time you press the button,the time
changes at the step of 5 minutes; one hour later, the time will changes at
the step of 30 minutes.
運轉中可通過 調整運轉時間
。
20
Default settings
CONT
5 MIN.
15 MIN.
12 HOUR
出 廠 設置為
DRY COOL mode
涼 乾燥 模式