ENGLISH
Please read and save these instructions for future reference.
Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage!
®
472912 • Mobile Kit, Rev. 2, May 2012
Copyright 2012 © VENCO PRODUCTS • www.vencoproducts.com
MOBILE KIT
Form 472912
Designed to mount on VENCO PRODUCTS Industrial Air Circulators (sizes 24" through 48"). Provides a portable fixture for air circulator. Constructed of steel.
UL/cUL Listed Standard 507.
UNPACKING
1. Inspect for any damage that may have occurred during transit.
2. Shipping damage claim must be filed with carrier.
3. Check all parts listed are accounted for.
MAINTENANCE
CAUTION:
To reduce the risk of injury disconnect from power supply before servicing. Always unplug the power cord.
1. Depending on the usage and severity, a regularly scheduled inspection should be established.
2. Check for unusual noises when circulator is running.
3. Periodically inspect and tighten all bolts, screws and set screws.
ASSEMBLY AND INSTALLATION
WARNING:
Installation and troubleshooting to be performed only by qualified person(s).
CAUTION:
Support fan securely during assembly and installation.
1. Position fan with cord wrap and switch located on top.
2. Fasten handle bracket assembly(A) to the air circulator tube (opposite side of cord wrap) using holes provided and four whiz bolts(B).
3. On the same side using holes provided, fasten the foot bracket(C) underneath the air circulator tube with four whiz bolts(B).
4. Use remaining holes provided underneath the air circulator and four whiz bolts(B) to fasten the foot/wheel assembly(D). The foot/wheel assembly will be on the
opposite side of handle bracket assembly when properly installed.
Model
Use on Model
Includes
Quantity
MAC-WK-S
MAC-24-323-B3-J1
MAC-30-324-C5-J1
MAC-36-322-C5-J1
(A) Handle Bracket Assembly
(B) 1/4"-20 Whiz Nut
(C) Foot Bracket
(D) Foot/Wheel Assembly
1
12
1
1
MAC-WK-L
MAC-36-5-J1
MAC-42-320-C7-J1
MAC-42-320-C7-U3
MAC-42-7-J1
MAC-42-7-U3
MAC-42-320-C7-J1
MAC-42-320-C7-U3
MAC-48-7-J1
MAC-48-7-U3
Air Circulator Tube
A
B
D
C
Cord Wrap
B
B
E33599
Figure 1 — Mobile Kit Assembly
DIMENSIONS AND SPECIFICATIONS
GENERAL SAFETY
WARNING:
To reduce the risk of fire, electrical shock, or injury to persons, observe the following:
a. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
b. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting the means to prevent power from being switched on
accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Do
not depend on any switch to disconnect power supply. Always unplug the power cord or turn off and lock disconnecting means as described.
WARNING:
To reduce the risk of electric shock, do not expose to water or rain.
1. Read and follow all instructions and cautionary markings.
2. Disconnect all power before installing or servicing.
3. Follow all local safety codes in the United States and Canada, as well as the Occupational Safety and Health Act (OSHA) in the United States.
