KDF Plus Series, Инструкция по эксплуатации

Страница: 19 / 31

17
■
Program operation overview
This machine can be operated automatically by pre-programming the temperature control, gas control
and output control.
An example program is shown below, and pattern 17 will be programmed based on this.
Pattern
Name
：
KDF PLUS
SEG Temp.
℃
Time Buzzer GAS1 EV1 EV2 EV3
ON OFF ON OFF ON OFF ON OFF
0 20 0:10 0 0:00 --:-- --:-- --:-- --:-- --:-- --:-- --:--
1 500 0:15 0 --:-- --:-- --:-- --:-- --:-- --:-- --:-- --:--
2 700 0:10 1 --:-- 0:00 --:-- --:-- 0:00 --:-- --:-- --:--
3 700 0:10 0 --:-- --:-- --:-- --:-- --:-- 0:00 0:00 --:--
4 900 0:15 2 0:00 --:-- --:-- --:-- --:-- --:-- --:-- 0:05
5 900 0:15 0 --:-- 0:05 --:-- --:-- --:-- --:-- --:-- --:--
※
Items not programmed are omitted.
◆ Program example and Operation explanation
1. Segment 0
：
・
The temperature of segment 0 is always held. In the example, the operation is maintained for 0:10
at 20
℃
.
・ Gas 1-ON is set to 0:00, so it turns on immediately after segment 0 operation (after 0:00).
2. Segment 1
：
・
Because the temperature is set to 500
℃
, the operation will increase from 20
℃
of the previous
segment to 500
℃
in 0:15 of the time.
3. Segment 2 ：
・
Since the temperature is 700
℃
, which is the same as for segment 1, the temperature rises from
500
℃
in the previous segment to 700
℃
in 0:10 time.
・
Since 1 is built in the buzzer, the buzzer sounds with the tone of 1 at the end of segment 2.
・
Gas 1-OFF is set to 0:00, so it will be turned off immediately after shifting to segment 2 (after 0:00).
・ EV2-ON is set to 0:00, so it will turn ON immediately after moving to segment 2 (after 0:00).