KDF Plus Series, Инструкция по эксплуатации

Страница: 17 / 31

15
Standby mode
・
When the power is turned on, the title screen is displayed, then the following screen is displayed, and
the unit enters standby mode. You can switch to each mode by operating in this mode.
◆
Explanation of main display
・
Pattern name
：
The name set for the selected pattern is displayed.
・ Pattern ： The pattern number being selected is displayed.
There are 50 patterns from 00 to 49.
・
Maximum Temp.
：
The maximum temperature among the temperatures programmed in the
selected pattern is displayed.
・ Operation Time ： Displays the operation time of the selected pattern.
・ Current Temp. ： Displays the current temperature.
・ ：
Displayed when the furnace door is open. If you open the door during
operation, the power to the heater will be cut off for safety.
・ ： Displayed when the cooling fan is operating.
It operates at a furnace temperature of 350 ℃ or higher and stops at 300 ℃
or lower. While this message is displayed, turn off the power switch or turn off
the
breaker to prevent the power supply from being interrupted. The fan will
stop and the enclosure will become hot, which is dangerous.
・ START ／ STOP Lamp ： Lights during operation. Also, it flashes during each operation of the "auto
tuning" and "soak stop"
・
KEY LOCK Lamp
：
Lights during key lock.
◆
Explanation of operation keys
・
F1
～
F4
：
Function keys. The displayed on the screen operates.
F1
：
Switch to program mode
F2 ： Switch to copy mode
F3 ： Switch to initial setting mode
F4
：
Switch to maintenance mode
・
Up/down/left/right direction
：
The pattern number can be changed with the up/down buttons.
The left and right keys in this mode are invalid.
・ START ／ STOP ： Starts the operation of the selected pattern and shifts to the operation mode.
If the pattern is not programmed, it will not be accepted.
・
KEY LOCK
：
When pressed, the lamp lights up and keys other than the key lock are locked.
Press it again to cancel. It works in any mode other than the standby mode.
※
About key buzzer sound
When the key is pressed, it will sound once with a low tone if it is enabled, and twice with a high tone if it is disabled.
Also, in case of long-press or combination key, no sound will be heard when pressed and it will sound when enabled.
Up/down/left/right direction Key