8
■
Furnace Rear
※
The drawing below shows the 1500 Plus figure as a representative.
①
Eyebolt
：
Eyebolt for fixing this machine. Use wires to secure it to a sturdy
structure such as a wall to prevent it from falling.
②
Fan
intake
port
：
The intake port for the cooling fan.
③
Gas
pipe
outlet
：
The outlet for the gas introduction pipe attached to the furnace body.
Used
when
connecting
the
optional
gas
introduction
unit.
④
Temperature sensor
signal
output
terminal
：
When an optional temperature sensor is attached, the temperature
sensor signal can be output from this terminal. The red terminal is the
positive
pole. Options are K or Platinel thermocouples.
⑤
Cleaner, smoke exhaust
device
output
：
Power outlet for optional cleaner and smoke exhaust device. The 3000
and
5000Plus
are
connected using the included extension cable.
Do
not
connect
anything
other
than
our
designated
cleaner
and
smoke
exhaust
device.
⑥
External output terminal
：
The terminal block that outputs information inside the main unit to the
outside.
⑦
Remote
terminal
：
The connection terminal for remote control of the unit with a sequencer.
⑧
Gas introduction unit terminal
：
The Terminal for connecting the optional gas introduction unit.
⑨
Patlite
terminal
：
The Terminal for connecting an optional patrol light.
⑩
Overcurrent
breaker
：
The main breaker of the main unit.
⑪
Power supply terminal
：
The terminal to connect the power cord of this unit.
※
The power cord is directly attached to 300Plus (Only 300Plus)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Содержание Plus Series
Страница 2: ......
