KDF Plus Series, Инструкция по эксплуатации

Страница: 15 / 31

13
◆
REMOTE INPUT (remote input terminal)
・
Used for remote control of this unit with a sequencer, etc.
For the ON input, apply 5 to 24 VDC between COM and each signal for 1 second or longer.
The course is selected in binary, and each bit is turned ON/OFF.
The operation is similar to the operation from the operation panel.
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
：
COM (common terminal)
：
A/T start/stop
：
Pass
：
START
：
STOP
：
Course selection 2-0
：
Course selection 2-1
：
Course selection 2-2
：
Course selection 2-3
：
Course selection 2-4
：
Course selection 2-5
DC5
～
24V
●
GND
●
●
●
●
●
●
●
●
◆
GAS UNIT OUTPUT
・ A connector for connecting the optional gas introduction unit.
By connecting the gas introduction unit to this connector, the gas can be introduced as set in the
program items gas 1 and gas 2.
・
The following options can be connected.
※
For the connection method of the gas introduction unit, follow the instruction manual of the gas introduction unit.
300Plus
500Plus
1500Plus
3000Plus
5000Plus
： KDG-300
：
KDG-300
：
KDG-1500
：
KDG-3000
： KDG-5000
◆
SIGNAL LAMP OUTPUT
・ Connector for connecting optional 3-color signal lamp
You can display three states: standby, running, and error occurrence.
Installation is complete when the rear terminals are connected.