manualshive.com logo in svg

Yumpu 9MPT050F12A, Руководство по установке

Установочное руководство для продукта Yumpu 9MPT050F12A доступно для скачивания бесплатно на manualshive.com. Этот manual содержит все необходимые инструкции по установке и настройке устройства. Скачайте его сейчас, чтобы убедиться, что ваш продукт работает правильно и безопасно.

Поделиться
Скачать
background image

FIRE OR EXPLOSION HAZARD
This furnace is not designed for use in mobile

homes, trailers or recreational vehicles.
Such use could result in death, bodily injury

and/or property damage.

!

DIRECT VENT GAS FURNACE

FAN ASSISTED,

* Denotes Brands (C, H, T)

Electric Shock Hazard
Turn Off All Power Before

Servicing.
Failure to do so can result in

death, personal injury and/or

property damage.

International Comfort Products Corporation (USA)

Lewisburg, TN 37091

INSTALLER: Affix these instructions

on or adjacent to the furnace.

CONSUMER: Retain these

instructions for future reference.

!

Printed in U.S.A.

LP1

4/29/2003

440 01 2020 (01)

*9MPT & *9MPV

SAFETY REQUIREMENTS

Recognize safety information. This is the safety--alert symbol

!

. When you see this symbol on the furnace and in instructions manuals be alert to

the potential for personal injury.
Understand the signal words

DANGER, WARNING,

or

CAUTION.

These words are used with the safety--alert symbol.

DANGER

identifies the most

serious hazards, those that

will

result in severe personal injury or death.

WARNING

signifies a hazard that

could

result in personal injury or death.

CAUTION

is used to identify unsafe practices that

could

result in minor personal injury or product and property damage.

Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should
install, repair, or service heating equipment.
Untrained service personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be
performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached
to or shipped with the unit and other safety precautions that may apply.
Follow all safety codes. In the United States, follow all safety codes including the current edition National Fuel Gas Code (NFGC) ANSI
Z223.1--2002/NFPA No. 54--2002. In Canada, refer to the current edition of the National Standard of Canada Natural Gas and Propane Installation
Code (NSCNGPIC) CSA B149.1--00. Wear safety glasses and work gloves. Have fire extinguisher available during start--up and adjustment
procedures and service calls.
These instructions cover minimum requirements and conform to existing national standards and safety codes. In some instances, these instructions
exceed certain local codes and ordinances, especially those that may not have kept up with changing residential construction practices. We require
these instructions as a minimum for a safe installation.

Table of Contents

1. Safe Installation Requirements

3

. . . . . . . . . . . . . . . . .

2. Installation

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Combustion & Ventilation Air

7

. . . . . . . . . . . . . . . . . .

4. Vent & Combustion Air Piping

10

. . . . . . . . . . . . . . . .

5. Gas Supply and Piping

26

. . . . . . . . . . . . . . . . . . . . . .

6. Electrical Wiring

30

. . . . . . . . . . . . . . . . . . . . . . . . . . .

7. Ductwork and Filter

31

. . . . . . . . . . . . . . . . . . . . . . . .

8. Checks and Adjustments

34

. . . . . . . . . . . . . . . . . . . .

9. Furnace Maintenance

36

. . . . . . . . . . . . . . . . . . . . . . .

10. Sequence of Operation & Diagnostics

37

. . . . . . . . . .

11. Concentric Vent Termination

43

. . . . . . . . . . . . . . . . .

Tech Support and Parts

47

. . . . . . . . . . . . . . . . . . . . . . .

Содержание 9MPT050F12A



































































Отзывы:

Нет отзывов

Похожие инструкции для 9MPT050F12A

Williams 3144030 Owner'S Manual preview
3144030
Бренд: Williams Страницы: 20
Dettson AMP105-IEV Installation Instructions And Homeowner'S Manual preview
AMP105-IEV
Бренд: Dettson Страницы: 26
Amana AC9S80 Manual preview
AC9S80
Бренд: Amana Страницы: 20
Payne PG96XAT Installation, Start-Up, Operating And Service And Maintenance Instructions preview
PG96XAT
Бренд: Payne Страницы: 86
Payne PG96VTA Installation, Start-Up, Operating And Service And Maintenance Instructions preview
PG96VTA
Бренд: Payne Страницы: 92
VERDER CARBOLITE GERO VMF 10/6 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO VMF 10/6
Бренд: VERDER Страницы: 32
VERDER CARBOLITE GERO TZF 16/90/610 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO TZF 16/90/610
Бренд: VERDER Страницы: 52
Blaze King APEX CBT Users Installation Operation & Maintenance Manual preview
APEX CBT
Бренд: Blaze King Страницы: 45
Carrier F96CTN Installation, Start-Up, Operating, Service And Maintenance Instructions preview
F96CTN
Бренд: Carrier Страницы: 76
Carrier 59SP6A Installation, Start-Up, Operating, Service And Maintenance Instructions preview
59SP6A
Бренд: Carrier Страницы: 74
Carrier 59SC2B Installation, Start-Up, Operating And Service And Maintenance Instructions preview
59SC2B
Бренд: Carrier Страницы: 86
ICP C9MPT User'S Information Manual preview
C9MPT
Бренд: ICP Страницы: 10
Allied 80G2DFE Installation Instructions Manual preview
80G2DFE
Бренд: Allied Страницы: 36
Allied 95G1UH040BE12X Repair Parts preview
95G1UH040BE12X
Бренд: Allied Страницы: 46
Allied 92G1UHE Installation Instructions Manual preview
92G1UHE
Бренд: Allied Страницы: 55
Allied 95G1UHE Installation Instructions Manual preview
95G1UHE
Бренд: Allied Страницы: 59
Allied 92G1UH Installation Instructions Manual preview
92G1UH
Бренд: Allied Страницы: 57
Allied 92G1UH-P Installation Instructions Manual preview
92G1UH-P
Бренд: Allied Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды