KBR multimax 3D6
V3.00
EDEBD
A0210-3313-1_EN
10
Range of functions
2.4
Switch-off of consumers via relay outputs
The basic module disposes of 5 non-floating relay contacts to switch off the
consumers involved in the optimization.
Using additional 4-stage components, up to 32 switching outputs can be
realized (see "Connection of additional modules").
NO or NC contact functions can be programmed to switch off the consumers.
2.5
Decentralization through substations
The
multimax
energy control system with its central component can be
expanded by means of substations. Communication is carried out via a bus line.
2.6
Status recording via message modules
By determining the state of the devices that can be optimized, the optimization
action can be controlled. A message input can be associated to every output.
The multimax 3 load management system receives important information
about the individual consumers via the message inputs. It can be determined
whether
the consumer has been identified as requiring optimization by the input
the consumer has been identified as inactive
There are additional possibilities:
External control of the consumer (permanently on (manual_on)
or permanently off (manual_off))
2.7
Maximum prewarning contact
On the device side, a maximum prewarning contact is available, which can be
connected to any relay output.
Signaling for manual interventions in production processes.
Starting a generator (utility station).
Default as NO contact (if active).
