manualshive.com logo in svg

KBR multimax 3D6, Руководство пользователя

Поделиться
Скачать
KBR multimax 3D6 Скачать руководство пользователя страница 14

KBR multimax 3D6 

V3.00

EDEBD

A0210-3313-1_EN

14

Installation

4 Installation

In this chapter, you will find a description of:

 „Device memory, battery-buffered“

 „Mounting the device“

 „Connections“

4.1 

Device memory, battery-buffered

The device is equipped with an internal data memory, which is battery buffered 
to preserve long-term data. To prevent it from being discharged, this backup 
battery (e.g. Varta CR 2032) is not built in when the device is delivered, but 
included separately in the delivery.

Before the initial start-up of the device, please insert the backup battery first (as 
described in the following), as otherwise all stored data would be lost in case of 
a power failure.

4.1.1 

Inserting or replacing backup battery:

1.

  Disconnect the device from the supply voltage.

2.

  Lift the upper housing cover with a suitable tool (e.g. a small screwdriver).

3.

  When replacing a battery, remove the empty battery from the clamping 

bracket with a tool.

4.

  Push the new battery into the clamping bracket and make sure that it is 

inserted correctly and has the right polarity.

5.

  Put the rear housing cover back on and push it down until it clicks into place.

6.

 Reconnect the device to the supply voltage.

Caution

Содержание multimax 3D6









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды