KBL Tower pureENERGY 5.0, Руководство по эксплуатации

Страница: 38 / 56

O p e r a t i n g I n s t r u c t i o n s | KBL Tower pureEnergy 5.0
38
10.2 Maintenance intervals
MAINTENANCE PLAN
Component
500 h / 6 months
2000 h / 1 Y
ear
5000 h / 5 Y
ears
10000 h / 10 Y
ears
Activity
Acrylic panes
X
Inspect and replace as
necessary
X
Replace
Sleeve of the
door cable
entry
X
Inspect and replace as
necessary
Chassis and
associated
fasteners
X
Inspect and replace as
necessary
X
Replace
Wiring and
associated
plugs / terminal
connections
X
Inspect and replace as
necessary
X
Replace
Starter
decorative
lighting
X
Replace
Contactors
X
Inspect and replace as
necessary
X
Replace
Component
After appr
ox. 250
operating hours
After appr
ox. 800
operating hours
After appr
ox. 1000
operating hours
Activity
Tubes X
Replace
aquaCool
nozzles
X
Inspect and replace
as necessary
X
Replace
Additional or recurring inspections
Every 6 months
cleaning service
Make sure that the inside and outside of the
tanning device is cleaned and free from dust,
fluff or objects.
See 9.1 -> Operating Instructions, Inadequate
cleaning leads to overheating. As a result, this
can lead to damage of the tanning device.
Every 12 months
inspection
Please note that the tanning device must be
inspected regularly by a KBL authorized rep-
resentative every 12 months (from date of
installation) to maintain its proper condition!.
10 Years
inspection
If the tanning device is in use for longer than
10 years / 10000h, it must be completely
overhauled by qualified, trained and autho-
rized service technicians.
On start up
If the tanning device has not been used for
a longer period of time, then it must first be
inspected by qualified, trained and authorized
service technicians before being put back into
operation.