background image

O p e r a t i n g   I n s t r u c t i o n s

 

|

 KBL Tower pureEnergy 5.0

7

2.4 Definitions

STUDIO OPERATOR

People who provide tanning devices to users on a 
commercial basis. The studio operator is trained 
to operate and maintain the tanning device. He is 
responsible for the proper operation of the tanning 
device as well as for compliance with the mainte-
nance intervals.

USER

A person who uses the tanning device. 

STAFF

People who are responsible for the operation, clean-
ing and disinfection as well as for the general main-
tenance work and instruction of the user on how to 
operate the tanning devices.

QUALIFIED, TRAINED AND AUTHORIZED SER-
VICE TECHNICIAN

Qualified staff who have been trained and authorized  
by the manufacturer for assembly and maintenance 
work with specific device.

2.5 Transport

WARNING

Overturning load

Danger of being crushed by heavy parts 
of the equipment.

•  Keep the safety distance to the trans-

port machine.

•  Do not walk under the load.
• Wear safety shoes.

TRANSPORT BY FORKLIFT TRUCK

During transport the tanning device may 
be damaged when using forklift forks that 
are too short.

• Use only sufficiently long forks.

The box with the tanning device components is 
mounted on a pallet.

• Insert the forks carefully into the openings of the 

pallet.

• Lift the load by a few centimeters.

• Transport the load carefully to the place of 

installation.

OTHER MODES OF TRANSPORT

If a forklift truck cannot be used for transport, the 
box must be unpacked and the parts inside must be 
transported individually to the place of installation, 
e.g. using a dolly. Depending on the weight of the 
components, lifting them might require several 
people.

2.6 Environmental regulations

      (disposal of lamps)

Fluorescent lamps contain fluorescent materials 
and other waste products containing mercury. 
Some areas of the USA and Canada have specific 
regulations regarding disposal of these waste. Please 
check the laws in your area and act in accordance 
with municipal waste regulations. Please retain proof 
of proper disposal of lamps. Your local regulatory 
agency can assist you with the disposal of lamps. 
Report the number of lamps to your local agency by 
telephone or in writing. The regulatory agency can 
provide you with a delivery point for your lamps or will 
take care, in conjunction with a disposal company, 
of the collection and proper disposal of the lamps 
(Fees for this may apply). Please contact your code 
enforcement officials for more information regarding 
laws governing disposal of these components in 
your area.

Содержание Tower pureENERGY 5.0

























































Отзывы: