KBL Tower pureENERGY 5.0, Руководство по эксплуатации

Страница: 39 / 56

O p e r a t i n g I n s t r u c t i o n s | KBL Tower pureEnergy 5.0
39
10.3 Tools and aids
Hexagon socket screwdriver
Wrench sizes: 2,5 + 4mm
PH2
Standard Phillips screwdriver (PH2)
Number of qualified, trained and authorized service
technician required for this maintenance task.
The following chapters describe the work steps
required for carrying out maintenance and care
actions.
At the beginning of each chapter, the required tools
and aids are depicted, unless the corresponding
process can be carried out by one individual person
without any further auxiliary equipment.
The assembly is basically carried out in
reverse order of the disassembly.
Exceptions are specifically pointed out.
10.5 Acrylic panes
The acrylic panels used for the tanning devices are
made of acrylic glass especially developed for this
application, featuring a particularly high UV permea-
bility and resistance, as well as an easy-care, hygien-
ic surface that is gentle on the skin.
• The instructions for cleaning and care must be
observed!
• The outer surface can be cleaned without any pre-
paratory works.
The panes are cleaned from the inside
whenever necessary. When cleaning the
inside, it is recommended to clean also
the tubes.
REMOVING ACRYLIC PANES
2,5
The illustration shows the disassembly at the door.
Disassembling of sides and rear wall is carried out in
same manner.
2,5
①
①
Remove the three hexagonal screws of the
side covering strip.
⇒
Fold back the side covering strip.