ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 59 -
OIL PUMP INSPECTION
After the oil pump is installed, the oil pump needs to be
drained and filled. As shown in the figure on the left,
insert the nozzle of the oil can into the output pipe of
the oil pump, remove the oil cap, and then fill the oil.
Until the oil drips at the installation location of the oil
pump(at the bottom of the oil pump), finally install the
oil cap, and then install the output oil pipe to the
carburetor.
COMMON PROBLEMS AND CAUSES
OF LUBRICATION SYSTEM
PERFERMANCE
REASON
Lubricating oil consumes
too fast
engine oil leakage
The lubricating oil is not
clean
The lubricating oil is not
changed regularly
The corresponding lubricating
oil is not used as required
