ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 21 -
RIDING INSTRUCTIONS
PREPARATION BEFORE RIDING
1.
Check fuel level in fuel tank and replenish if necessary.
2.
Check fluid level in hand brake fluid reservoir and replenish if necessary.
3.
Check fluid level in foot brake fluid reservoir and replenish if necessary.
4.
Check brake pad wear condition at the hand brake clamp system.
5.
Check brake pad wear condition at the foot brake clamp system.
6.
Check braking system operate condition.
7.
Check antifreeze level.
8.
Check the chain.
9.
Inspect rear sprocket, engine sprocket and chain guide structure.
10.
Check the chain adjuster.
11.
Check the outer surface of the tire.
12.
Check tire pressure.
13.
Check battery level.
14.
Check the thickness of the front disc brake.
15.
Check the thickness of the rear disc brake.
16.
Check the torque of each fastener.
17.
Check the engine gear.
18.
Check cover parts.
19.
Check the fuel tank switch.
20.
Check protective apparels are all-ready worn.
PRECAUTIONS FOR STARTING
The steps of electric ignition are as follows:
1. Turn the oil tank switch to the "ON" position;
2. Open the electric lock;
3. Pinch the clutch lever with the left hand;
4. Pinch the brake lever with the right hand;
5. Long Push the ignition switch with the fingers of right hand;
6. Release the ignition switch after the engine works properly.
That’s all for starting.
PRECAUTIONS FOR STOPPING
1.
Check the condition of the vehicle and the rider’s Equipment before starting off.
2.
Speed up slowly when just starting off.
3.
Start in gear “1” for ensure safety.
