ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 41 -
corresponding pump or oil circuit, or the corresponding
One or more parts of the brake system are in poor
condition. Once the above situation occurs, please
check the brake system immediately and contact your
KAYO dealer.
CHECK THE DISC BRAKE
Brake disc
Checking Steps are as follows:
1.
Check whether there are cracks, dents and other
damages on the surface
2.
Measure the thickness of the disc brake and
compare it with the limit thickness required.
3.
If the thickness of disc brake is less than or equal to
the limit thickness of the disc brake, it must be
replaced immediately.
The limit thickness table of disc brake is as follows:
Limit thickness of
Front Brake Disc
Limit thickness of
Rear Brake Disc
KT250
2.5mm
3.5mm
CHECK THE FRONT BRAKE LIQUID LEVEL
KT250 uses hydraulic disc brakes, and you can check
the liquid level through the observation hole.
If the liquid level is lower than the bottom edge of the
observation hole, you should immediately refuel the
fluid to the upper edge.
