ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 36 -
CHECK AND CLEAN THE CHAIN
Checking Steps are as follows:
1.
Observe the chain from the rear of the vehicle to
check whether the chain is skewed as a whole
2.
Rotate the rear wheel by hand and observe whether
the rotation of the rear wheel is smooth
3.
Carefully check the gap between the chains to see if
there is any sediment attached
Clean the Chain:
Use a special cleaning detergent to wash the surface,slit
and gap of the chain; wait until the chain is naturally
air-dried, and then apply a layer of anti-rust oil on the
surface of the chain.
REMOVING OR INSTALLING THE CHAIN
Removing the Chain:
1.
Remove the spring leaf on the chain.
2.
Remove the movable section of the chain.
3.
Pull out the chain from the sprocket.
Installing Steps:
The installment should be carried out in the reverse
order of removal.
