ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 51 -
Max Level
Stop and stand the motorcycle upright on a
horizontal surface.
Release the tank cap and let the hot steam spill out.
Then open the cap to complete the disassembly.
Sway the motorcycle from side to side and then
check the antifreeze level, which should be
between Min and Max.
If the level does not match the specified value,
correct the antifreeze level.
DRAIN OUT THE COOLANT
screw
You can drain the coolant out of the engine and cooling
system through adjusting the screw.
Main work:
Stand the motorcycle upright and allow the engine
and coolant system to cool down.
Place a suitable container under the screw, which is
on the bottom of the water pump and is used to
drain the coolant.
Remove the screw. The coolant still can’t be drain
out at this time due to pressure problem.
Remove the tank cap, make the air into the cooling
system to drain the antifreeze.
NOTE
: If the antifreeze drains out without remove the
cap, it means that there must one or more air leakage
and need to do an overall check.
FILLING THE COOLING SYSTEM
