www.kayomoto.us
- 16 -
Warning: Never use high pressure water to clean the vehicle. Avoid direct contact of water flow with coils, pipe
plugs, carburetor or any electrical components.
Warning
: do not use high pressure water to clean it. Avoid making the water directly touch with coils, pipe plugs,
carburetors or any electrical components.
Storage and use of vehicles
When you plan to store your vehicle for long periods of non-use, follow these steps:
1. Block the exhaust pipe;
2. Thoroughly clean the motorcycle;
3. Wait for the motorcycle to air dry naturally;
4. Start the engine for about 5 minutes to heat the lubricating oil, and then empty the oil from the engine;
5. Add new engine lubricant to the engine;
6. Empty the fuel tank (if it is not used for a long time, the gasoline will deteriorate);
7. Lubricate the chain;
8. Apply oil to all unpainted metal surfaces to avoid rusting;
9. Keep motorcycle wheels floating when storing motorcycles. If this condition cannot be met, cardboard or
padding can be used under motorcycle tires.
10. Cover the motorcycle to prevent dust and dirt from adhering.
Note:
when applying anti-rust oil, please do not splash oil on the brake and rubber parts, This may cause rubber
parts to deteriorate.
.
After the motorcycle is stored for a long time, please follow these steps before putting it into use:
1. Remove the obstruction in the exhaust pipe;
2. Tighten the spark plug;
3. Fill the fuel tank with fuel;
4. Check the inspection items before daily driving;
5, conventional lubrication of motorcycles.
