www.kayomoto.us
- 26 -
26
、
Conventional lubrication
Every part of the vehicle needs to be lubricated regularly. After cleaning
the vehicle with pressure water, the motorcycle also needs to be lubricated.
Before lubricating the components, the rusty components need to be
cleaned with antioxidants and remove any remaining oil, grease and dirt.
Generally, the components that need to be lubricated are:
①
;
②
;
earing
③
;
④
;
⑤
;
⑥
.
Use a tube spray to lubricate under pressure. Use grease in the throttle
cable.
Note
: After driving a motorcycle on wet roads, the chain must be
lubricated even if the chain looks dry. Please use KAYO recommended
products for lubrication.
27
、
Rear shock absorber inspection
We equipped this model with FASTACE dual adjustable nitrogen airbag
rear shock absorbers. Check the rear shock absorber to see if the airbag is
normal and whether the spring is cracked. If necessary, replace the rear
shock absorber.
Please follow the steps below to disassemble the rear shock absorber:
Remove the muffler (see the exhaust system inspection section for
details);
Remove the mounting bolts of the rear shock absorber and the frame;
Loosen the U-shaped rocker arm and triangular rocker arm bolts (do not
remove);
Remove the rear shock absorber and triangle rocker connecting bolt
⑧
;
After confirming that there is no interference, remove the rear shock
absorber from the side;
When installing the rear shock absorber, proceed in the reverse order of
removal.
○
1
○
2
○
1
○
2
○
3
○
4
○
5
○
6
○
7
⑧
