www.kayomoto.us
- 18 -
Check the screws and nuts for tightness
○
●
●
●
Change the fuel screen
○
●
●
●
Check idle
○
●
●
●
Final check: Check the vehicle for safe operation and take a test ride
○
●
●
●
○ One-time interval ● Periodic interval
Note:
this table is for reference only. Please adjust the period according to the usage of motorcycle.
Warning:
the inspection, adjustment and replacement of the engine parts should be carried out after
consulting KAYO service center to avoid damage to the engine.
Specific maintenance content
1.Clutch handle
The clutch handle can be adjusted according to your actual needs:
By adjusting the nut, the pull of clutch lever can be changed.
This adjustment does not change the internal structure of the clutch, so it
will not affect the normal use of the clutch.
Note: The clamping force of the clutch handle should not be adjusted too
much, otherwise the clutch line will be easily broken.
2.Clutch disc:
For the inspection, adjustment and replacement of this item, please refer to
the engine maintenance manual below for details
3. Throttle:
Turn the throttle handle by hand to checking if it is smooth and snaps back
quickly.
Check whether the throttle cable has a free play of 10-20mm;
If the free play is too little, adjust as follows:
Loosen the lock nut at the end of the throttle cable,
Rotate the adjuster until free play is correct,
Then tighten the lock nut.
4.Spark plug:
Engine spark plug torque is 25-30N • m.
The spark plug must be removed regularly to check the gap (0.6 to 0.7 mm)
between the electrodes. If the spark plug contains oil or carbon, clean with
a wire brush or similar. Measure the distance between the electrodes with
a measuring instrument and adjust it to prevent abnormal bending of the
external electrodes. If the spark plug electrode is rusted, damaged, or the
insulator is broken, the spark plug must be replaced.
Note: The spark plug should be checked every 10 hours and replaced
every 20 hours.
Note: If engine performance decreases, replace spark plug to restore
normal performance
Note: if engine performance degrades, replace ignition plugs to restore
normal performance
5
、
air filter
Remove the seat
⑤
；
Remove the side panel
⑥
；
Checke the air filter
。
Installation and restoration shall be
carried out in reverse order of
removal.
○
1
○
2
○
3
○
4
○
5
○
6
○
7
