FI Cleaner Tool User Manual [rev. 003] | www.healtech-electronics.com/FIC
1/2
1.
Foreword
2.
Features
3.
Warranty
Before using this product, please ensure the bike
is compatible with this tool. Check the part number
on the packaging and use the
Product Advisor
on our website to check compatibility. For more
information on this product, please visit:
www.healtech-electronics.com/FIC
Congratulations on your purchase of an FI Cleaner
Tool. Products from HealTech Electronics Ltd. are
the most advanced aftermarket accessories and
maintenance tools for motorcycles.
The FI Cleaner Tool is compatible with a wide range
of the current Euro 4 emission class motorcycles
(2017 onwards, depending on make/model).
The engine management system monitors
various sensors of the motorcycle. Whenever
there’s a fault in the system, the FI light will come
and stay on even if the fault condition no longer
exists, e.g. a loose connector was reconnected.
It takes several full running cycles and a lot of
time to get the error cleared without an OBD Tool.
This is when the FIC Tool comes in very handy
for workshops – it saves a lot of time whenever
working on a motorcycle. It is much quicker and
more convenient to use the FIC Tool for clearing
errors than using an OBD Tool.
Note:
- The FIC Tool will not clear the FI light if the error
is still active. However, it will clear it in a few
seconds if the problem has been resolved.
- The FIC Tool will not clear the error history (stored
errors) from the ECU, so it will still be possible to
troubleshoot recurring problems later.
- The FIC Tool does not connect to the ABS ECU,
therefore it will not clear the ABS error light.
Cost effective option
The unit is motorcycle brand-specific. Each FIC
model is compatible with many bike models/
years within a brand.
Save on service bills! The FIC Tool is an economical
solution for bike owners who carry out their own
maintenance.
Save on servicing time! It is much quicker and
more convenient to use the FIC Tool for clearing
errors than using an OBD Tool. Faster turnaround
and lower costs for workshops.
Quick and simple to use
Just plug the FIC Tool into the diagnostic connector,
turn the ignition key ON and wait a few seconds to
see the result on the bicolor status LED.
Built to last
- Rugged design, encased in epoxy resin.
- Only high-quality SMD components used.
- Each unit is extensively tested prior to shipping.
- Oil and water resistant (IP68).
Light and small
The FIC module is hardly larger than the OEM
diagnostic connector it connects to.
HealTech Electronics Ltd. guarantees this product
against defects in material and workmanship for a
period of two (2) years.
The warranty period starts from the date of the
original purchase as shown on the invoice.
Wipes the FI error codes from the ECU | Model: FIC-xxx
FI Cleaner Tool
User Manual
4.
Specifications
- Supply voltage: +8V to +24V
- Max. supply current at 12V: 60 mA
- Operating temp: -40°C to +80°C (-40°F to +176°F)
- Waterproof (IP68)
- Unit size: 20 x 30 x 13 mm (1.2” x 0.8” x 0.5”)
- Reverse polarity and transient protection
