KaVo ELECTROmatic TM, Инструкция по эксплуатации

Страница: 37 / 90

Instructions for use ELECTROmatic TM and TMM/TMC
4 Installation | 4.4 Installation position 1: Mount below a holder
CAUTION
Damage to the dentist element.
Installations involving an intervention on the treatment unit might damage
components, which can interfere with the safe function and cause injury.
▶ Have installations involving an intervention on the treatment unit per-
formed by trained expert personnel only.
▶ Have the treatment unit subjected to a safety check after installation.
▶
Use the insert holder as a template for the screw positions on the underside
of a holder. If possible, use existing screws or perforations as screw posi-
tions.
Assembly variant a)
The following parts from the scope of delivery and the installation set are
needed:
▪ 1x Insert holder
▪ 4x Screws M4x12
④
with self-locking nuts
①
▪ 4x Washers ②
▶
Use 4 screws
④
and 4 washers
②
to screw the insert holder to the holder
and fasten it using the 4 nuts
①
.
1
4
4
4
Assembly variant b)
The following parts from the scope of delivery and the installation set are
needed:
▪ 1x Insert holder
▪ 8x Screws M4x12 ④
▪ 4x Spacer bolts, 35 mm
⑦
▶
Use 8 screws to mount the spacer bolts
⑦
or larger commercial spacer bolts
(electronics supplies) between the insert holder and the lower edge of the
holder to increase the distance between the holder and the insert holder, if
applicable.
8
1
4
37 / 90