Kathrein UFS 946/CI+, Руководство по эксплуатации

Страница: 80 / 124

80
Mainmenu - Settings
Transponder Frequency
Use the

buttons (transponder frequency already stored) or the number pad (transponder
frequency not yet stored) to select the transponder frequency to be tested. At the bottom right of the
on-screen display, the receiver shows the current signal strength and signal quality of the selected
transponder.
The “Polarisation” and “Symbol Rate” options need be specifi ed only if the transponder has yet
to be saved.
Polarisation
Select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number pad to enter the corresponding symbol rate.
Tuner Confi guration
You should make changes only if you are thoroughly familiar with the confi guration
of your satellite reception system! If you do not know the confi guration of your
satellite reception system, contact your specialist dealer.
Instructions on how to perform the antenna confi guration can be found in the Operating manual Part 1,
“Connection and set-up”, “First installation”.
Individual menus for the settings are not selected from the Mainmenu using the

(green) button, instead
they must be called up manually using the

button.
You do not need every time to open the menu for setting/aligning the BAS 60
incl. HDZ 60 via the Mainmenu - Settings - Antenna & Satellite - Tuner
Confi guration, instead you can open this menu straight from the live picture using
the

(green) button).