Kathrein UFS 946/CI+, Руководство по эксплуатации

Страница: 67 / 124

67
Video Settings
After calling up the menu you will see the following display (depending on the selected signal output):
Mainmenu - Settings
Individual items are selected using the

buttons. Changes to the current settings can be made
using the

buttons.
Video Output via
The rear panel outputs video via the HDMI socket on the unit's rear panel.
HDMI/YPbPr Resolution
Here you can select the video resolution that will be output at the TV set. Either
- 1080p (resolution 1920 x 1080, full-screen images),
- 1080i (resolution 1920 x 1080, half-screen images),
- 720p (resolution 1280 x 720, full-screen images),
- 576p (resolution 720 x 576, full-screen images) or
- Automatic
Force 576i (must be supported by the TV set otherwise you will not see a TV picture)
You can only and need only make this setting if you have selected the setting “Automatic” for “HDMI/
YPbPr Resolution”. If for a programme that is transmitted in the format 720 x 576 (standard TV),
the original format is to be transmitted to the TV set, select the “On” setting. If the setting is “Off”,
the programme may be automatically scaled up to the HDTV format 720p by the receiver.
For this, refer to the operating instructions for your TV set and take care to select
only those settings that your TV set can process.